Sunsei SE-400 6W Solar Panel Additional Information From ICP Solar

- Provides immediate battery charging when exposed to daylight, even on cloudy days
- Patent-pending touch-action indicator lets you know your panel is charging
- Plug’n’Play® for quick connections & instant expansion
- Cigarette lighter adaptor, battery clamps, terminal rings and connector wires included
- Connect multiple panels in seconds without tools or rewiring

Included Accessories
Extension Power Cable (10ft)
Panel-to-Panel Jumper Cable (1ft)
O-Ring Connector Wire (1.5ft)
Battery Clamp Wire (1.5ft)
Male Cigar Lighter Cable (1.5ft)
Female Cigar Lighter Cable (1.5ft)
2 Wire Twist Connectors
Stainless Mounting Screws

Technical Information
Model SE-400
Power 400mA, 12V - 15V (6W)
Dimensions 37.5 cm x 36 cm x 2.6 cm
Weight 3.3 lbs / 1.5 kg

Sunsei Solar Grip With Se-400 mounted

The mounting options included with the Sunsei Solar Grip allow the Sunsei SE-400 to be mounted in lots of different ways.

# Maximise your solar panel's output by angling it towards the sun
# Eliminates the need to drill
# Easy installation with no tools required
# 22mm pole/rail mount included
# Deck clamp included
# Rotates 360 degrees

Multi Mounted Se-400 on Sunsei Solar Grip

The Ansmann KFZ Power Check has 4 main functions:

1. Test Vehicle alternator for under or overcharge both of which can cause permanent battery damage and premature failure.

2. Test the batteries charge state and indicate a 0-25%, 25-75% or 75-100% charge

3. The battery power test will indicate the condition of the battery under load helping you determine if the battery is faulty and in need of replacement.

4. The Ansmann KFZ Power Check can also be used to monitor the charge process when using external chargers helping you to turn the external charger off before the battery is damaged through being overcharged.